Syringe noses with interchangeable nose tip

BMS Catalog

Description
Downloads

Significant savings compared to classic monobloc nozzles.

Nozzles with interchangeable attachments, with machined rear threads for adjustment
to your machines and to industrial standards 7/8» – 14 and an internal thread for the
screwing in standard interchangeable attachments.

To be used instead of monobloc nozzles: only replace the attachment if it is damaged
or when you use a different mould. Finely finished on NC machines.
With mirror polishing for optimum material flow.
These nozzles are available in all lengths. They can be supplied with 4 . attachments
different lengths, for applications with limited clearance.

General usage

Reverse Cone Nylon Type

With Full Cone – ABS Type

Standard free-pass design.
Minimal resistance to flow, minimal back pressure.
Standard opening of Ø 12.7mm if no other specifications were given to us.

Use: polyamides, acrylics and other expensive and heat-sensitive materials.
The material flows over a length of 38mm through a channel with a diameter of 3mm, and then into an inverted cone with a length of 25mm. The sprue breaks off in the nose, reducing the risk of burr.

For use with ABS, PVC and all other viscous materials.
Reduces heat development and material build-up.
We recommend using large openings to reduce the flow resistance. Cone 75mm long from rear opening, internal channel 12.7mm long.