Die turner

Mold handling

EMR rotary units for molds

The EAS Electric Mold Rotator is designed to safely rotate tools 90°.
EAS Electric Mold Rotators can handle loads from 3 to 60 tons.
They can be used for turning a mold or die to lift half of a mold or to rotate the mold for transportation reasons.
The complete unit is fully electric, so no hydraulics are required.

Despite their high value, the turning and opening of expensive molds and dies is still often done by means of an overhead crane. Dangerous for the operator and the risk of damage to the tools is high. The EAS turntables get the job done safely and quickly.
The EAS mold and mold rotators allow one operator to easily and safely turn the mold themselves.
In addition to a floor model, the type on a flat floor takes up less space. In addition, the flat floor type can be easily moved when not in use.

IMPORTANT POINTS:
Increased security
Less risk of damaging your expensive tools
Available for 3T to 50T dies and moulds
Standard and custom models

APPLICATIONS:
Wherever valuable tools must be handled safely and carefully, such as injection molding and blow molding, punching dies and injection molding tools.

OPERATION:
A tool is loaded on one side and moved to the upright plate; the tool does not need to be clamped.
When the tool is correctly positioned, the rotary drum and tool rotate 90 degrees.
After rotation, the tool (or tool half) can be removed from the other side of the unit.

  • Fully electric, so no hydraulics required.
  • one operator can easily and safely turn the mold himself.
  • Takes up less space
  • Increased security
  • Less risk of damage
  • Standard and custom models

Would you like to view and test this product?

That's possible! Visit our showroom and technical studio in Zandhoven.